Vehicle care
179
2. Remove cover.
3. Unscrew two plastic securing nuts
from the inside by hand.
4. Carefully remove tail light
assembly. Take care that the
cable duct remains in position.
Detach wiring plug from bulb
holder.
5. Remove and replace the bulb.
Tail lights (1 + 2)
Turn signal light (3)
Brake light (4)
6. Connect the wiring plug and press
the cable into the retainer. Install
tail light assembly in tailgate and
tighten securing nuts. Close
cover.
When assembling press the blind
into the rubber grommets to reach
full retention force.
7. Switch on the ignition, operate
and check all lights.
Summary of Contents for 2011 Astra J
