Technical Reference
OPEN824RL / RLW ADSL / VoIP Routers
66
The following screen appears:
step 3
In
the
Rule Name
field, enter the rule name as required.
step 4
From
the
Time Schedule
drop-down list, select the time schedule as required.
step 5
In
the
Source
and
Destination IP Address
fields, enter the addresses as required.
NOTE:
0.0.0.0 means that the address filter will not be activated and that port filters will
be used.
step 6
Select the protocol type from the
Type
drop-down list. (See Table 1: Predefined Port Filter for
more information.)
step 7
In
the
Source Port
field, enter 0 – 65535. (This allows all ports to connect with the application.)
step 8
In
the
Destination Port
field, enter 80 – 80. (These are the ports defined for HTTP.)
step 9
From
the
Inbound
and
Outbound
drop-down lists, select
Allow.
The new port filter rule for HTTP is shown below:
Configure your Virtual Server (“port forwarding”) settings so that incoming HTTP requests on port 80 will be
forwarded to the PC running your web server:
NOTE:
For details on how to configure the HTTP in Virtual Server, go to Add Virtual Server in the
Virtual Server section of this manual.
