missing, etc). The SmartUPS will still deliver power
to Pi, if connected to mains, but won't operate as
UPS.
Button Clicks
You can
configure
Rapsberry Pi to
execute a
command on specific number of button clicks. For example, if you
want to take a picture with your PiCamera you can configure
appropriate command in upspanel for a number of button clicks (up to
three). Any time you simultaneoulsy click for that set number, you
will take a picture.
1 Click
Start the output power if turned off/ User
defined command from upspanel.
2 Clicks
User defined command from upspanel.
3 Clicks
User defined command from upspanel.
Hold (for about 2 seconds) LED starts blinking fast Green,indicating
shutdown approaching in 50 seconds. (at this
point SmartUPS issues a shutdown command
to Pi).
Hold longer (about 6
seconds)
LED turns solid Red, and as soon as you let go
the button it shuts down power to Pi.
Startup and Shutdown Options
The startup and shutdown
options can be configured by
the upspanel GUI or by
changing the SmartUPS.cfg
file found in /etc/SmartUPS
on your Raspberry Pi.
**Configured options will only
work if the I2C cable is
connected.
**Start up options are designed for automated operation. When
SmartUPS is manually shutdown (by pressing and holding the button
until it power's off), upon power restotation to SmartUPS, you will
have to press the button to power up your Pi.
Copyright © 2014 OpenElectrons.com
3/7