3–2 • User Controls
ADA-8402-B User Manual (Iss. 02)
Card Overview
This section provides a general overview of the card-edge controls for the ADA-8402-B.
Figure 3.1
ADA-8402-B — Components
1. DIP Switches
This is a block of ten DIP Switches that can be used to specify the card control, selecting the
output mode, and applying a gain to the output from the card-edge. Refer to the section
“
Configuring the DIP Switches
” on page 3-3 for details.
2. EQ Adjustment (J3)
Set
J3
to
IN
(
Figure 3.2
) to extend reach, or to improve jitter, on long cable runs. The default
position is
OUT
(
Figure 3.3
) which disables this feature.
1) DIP Switches
2) EQ Adjustment (J3)
Figure 3.2
J3 — IN Position
Figure 3.3
J3 - OUT Position
1
2
IN
OUT
IN
OUT
