Step by Step
Enhanced phone functions
36
Answering calls from the entrance telephone and
opening the door
If an entrance telephone has been programmed, you can use your
telephone to speak to someone at the entrance telephone and to ac-
tivate a door opener.
If you have the proper authorization (contact your service personnel),
you can activate the door opener, enabling visitors to open the door
themselves by entering a 5-digit code (using a DTMF transmitter or
the keypad installed).
Speaking to visitors via the entrance telephone
Prerequisite: Your telephone rings.
^
Lift the handset within thirty seconds. You are connected to the en-
trance telephone immediately.
or
^
Lift the handset after more than thirty seconds.
j
Dial the entrance telephone number.
Opening the door from your telephone during a call from the
entrance telephone
Confirm the option shown.
Opening the door from your telephone without calling the
entrance telephone
N
Press the key shown.
Select and confirm the option shown.
j
Dial the entrance telephone number.
Opening the door with a code (at the door)
j
After ringing the bell, enter the five-digit code (using the keypad or a
DTMF transmitter). Depending on how the door opener has been pro-
grammed, a doorbell call signal may or may not be forwarded.
Open door?
*61=Door opener?
Special features must be taken into consideration if your tele-
phone operates with IP-Netpackage (system networking via
PC network)
