Step by Step
Making calls in the team/executive/secretary configuration
90
Making calls in the team/executive/
secretary configuration
If configured (consult your service personnel), you belong to a team
of subscribers with multiple lines (multi-line
Page 11). Your phone
features trunk keys (MULAP keys)
Lines
A distinction is made between primary and secondary lines. Each of
these line types can be used on a private or shared basis
Primary line
All multi-line telephones have a primary line. This line can be reached
in the usual manner via your public phone number. Incoming calls
are signaled on this line.
Secondary line
The secondary line on your phone is used as a primary line by another
subscriber. Your primary line, which is configured on another telephone,
simultaneously functions as the secondary line on that telephone.
Line utilization
Private line
A line that is used by a single telephone. This line cannot be used as
a secondary line by another telephone.
Shared line
A line that is configured on multiple telephones. The line status (if con-
figured) is displayed for all telephones that share this line. If, for example,
a shared line is being used by a telephone, a status message indicating
that this line is busy is displayed on all other telephones.
Direct call line
A line with a direct connection to another telephone.
You can see the status of the line from the LED.
Line seizure
Line seizure must be configured (consult your service personnel). If
automatic line seizure is configured, a trunk is automatically as-
signed when you lift the handset or press the trunk key.
