Kiosk Manager’s Guide: 20 Series
1/14/2022
V1.01
|
Pg. 17
Model 220 and Model 720 hold 5 locks; Model 920
holds 10. When it’s time to reload, here are the steps:
•
Grab the new locks and your kiosk key
•
If your kiosk dispenses more than one type of
lock, confirm the configuration so you put the
right locks in the right slots
•
Unlock and open the kiosk and locate the lock
dispenser (you’ll easily spot the coils)
•
Load from the front coil (facing you) because an
empty front coil means no lock will be dispensed
•
To prevent the locks from getting hung up, seat
them properly and not at an angle
•
Confirm all locks are properly situated, then
close and lock the kiosk
If you are unsure of these steps or have questions,
A Note about On-Site Kiosk Testing or Training
At present, there is no “Demo Mode” for testing or training on a 20 Series Kiosk. Any
information or payment that is entered into the kiosk is treated as ‘real’ information and
will show as such in all reporting.
If you need test a function – or want additional training – please
questions.
Kiosk Reports
From accounting for the cash in the kiosk to understanding how your kiosk is being
used, to viewing your tenants prospects when they use the kiosk, reports can give you
all the information you need to maximize its features. There are two places to find
reports: at the kiosk and in OpenPortal.
