Touch the Heating Thermostat panel icon ,
to open access to additional functions.
Follow the instructions below to control the VIBE - WFSTAT with your smart phone.
The home screen gives access to other functions:
Switch - switch the transmitter (thermostat) ON or OFF.
Note that if you turn the thermostat OFF, whilst this will save battery power,
the thermostat will no longer control the heating, which will also remain OFF.
Setpoint - touch the slider or ˄ / ˅ to change the current temperature set-point
Mode - Allows you to quickly change from Auto (programmed) temperature, to Manual or ECO
temperature levels. Manual and ECO temperature levels can be set from the Setpoint screen
Set the Central Heating
target temperature
(use the slider or the
˄ / ˅ arrows)
After the receiver has been connected to an Open Therm
boiler, add the thermostat into the C-Home (or Tuya) App;
an Open Therm enabled version of the App will load, giv-
ing access to flow temperature settings / real-time data
views, Open Therm parameter settings and status.
Child lock - when using the Open Therm version of the
App, Child lock can only be enabled / disabled via the App
Touch the pen icon to re-name
the device, and view / amend
basic parameters about the de-
vice settings / functions, including
device sharing, remote operation
(e.g. Amazon Echo).
From here you can also remove
the device from the App.
QR
058
P
re
pa
re
d
fo
r T
FC
G
ro
up
b
y:
J
. T
o
dd
Is
su
e 2:
A
ug
us
t
2020
Touch the settings icon to view /
amend week program, Child
lock, fine temperature adjust-
ment, Enable / disable frost
protection, or Factory reset
Weekly program screen:
adjust day / time / temperature
programming
Switch the
thermostat
ON or OFF
(see above)
Touch the clock icon to enter a timed schedule if
required. The schedule will switch the transmitter
ON and OFF (and thereby enable / disable the
weekly program) according to your requirements.
Use these icons to switch quickly between Manual, ECO (set
your own manual or Eco temperature which is retained for
next use), or Auto (current program or schedule in operation)
