DGW-L20X User Manual
OPENVOX
28
priexclusive cannot be changed on a reload.
Ignore Remote Hold
Indications
If you wish to ignore remote hold indications (and use MOH that is supplied
over the B channel) enable this option.
Block Outbound
Caller ID Name
Enable if you need to hide just the name and the number for legacy PBX
use. Only applies to PRI channels.
Wait for Caller ID
Name
Support caller ID on call waiting.
3.3 MFC/R2
3.3.1 MFC/R2 Signaling
Figure 3-3-1 MFC/R2 Signaling
Table 3-3-1 Definition of MFC/R2 Signaling
options
Definition
Enable Caller ID
Whether or not to use caller ID.
Init CAS Bit
The initial position of the CAS bits.
Variant
The standard of MFCR2: ITU, ANSI and China.