ET 200X(L) Series Digital Gateway User Manual
33/78
Figure 4-1-4 This Gateway Register with the Endpoint
Table 4-1-1 Definition of SIP Options
Options
Definition
Name
A name which is able to read by human. And it’s only used for
user’s reference.
Username
User name the end point use to authenticate with the gateway
Password
Password the endpoint will use to authenticate with the gateway.
Allowed characters
Registration
Whether this endpoint will registers with this gateway.
Hostname or IP Address
IP address or hostname of the endpoint or 'dynamic' if the endpoint
has a dynamic IP address. This will require registration. Notice: if
the input here is hostname and your DNS has changed, you must
reboot asterisk.
Transport
This sets the possible transport types for outgoing. Order of usage,
when the respective transport protocols are enabled, is UDP, TCP,
TLS. The first enabled transport type is only used for outbound
messages until a Registration takes place. During the peer
Registration the transport type may change to another supported
type if the peer requests so.
NAT Traversal
Addresses NAT-related issues in incoming SIP or media sessions.