UC Series User Manual
48
OpenVox Communication Co. , LTD.
URL: www.openvox.cn
Mailbox
Mailbox for this device. This should not be changed unless you know what you are doing.
Vmexten
Asterisk dialplan extension to reach voicemail for this device. Some devices use this to
auto-program the voicemail button on the endpoint. If left blank, the default vmexten setting is
automatically configured by the voicemail module. Only changed this on devices that may have
special needs.
Deny
IP Address range to deny access to, in the form of network/netmask.
Permit
IP Address range to allow access to, in the form of network/netmask. This can be a very useful
security option when dealing with remote extensions that are at a known location (such as a branch
office) or with a known ISP range for some home office situations.
Email Address
The email address that completed dictations are sent to.
Language
Code
This will cause all messages and voice prompts to use the selected language if installed.
CID
Num
Alias
The CID Number to use for internal calls, if different from the extension number. This is used to
masquerade as a different user. A common example is a team of support people who would like
their internal CallerID to display the general support number(a ringgroup or queue). There will be
no effect on external calls.
SIP Alias
If you want to support direct sip dialing of users internally or through anonymous sip calls, you can
supply a friendly name that can be used in a addition to the users extension to call them.
Features
Outbound
CID
Override the callerid when dialing out a trunk. Any setting here will override the common
outbound callerid set in the trunk admin.
Format:
“caller name” <#######>
Leave this filed blank to disable the outbound callerid feature for this user.
Asterisk Dial
Options
Cryptic Asterisk Dial Options, check to customize for this extension or un-check to use system
defaults set in Advanced Options. These will not apply to trunk options which are configured with
the trunk.
Ring Time
Number of seconds to ring prior to going to voicemail. Default will use the value set in Advanced
Settings. If no voicemail is configured this will be ignored.
Call Forward
Ring Time
Number of seconds to ring during a Call Forward Busy or Call Forward Unavailable call prior to
continuing to voicemail or specified destination. Setting to Always will not return, it will just
continue to ring. Default will use the current Ring Time. If voicemail is disabled and there is not
destination specified, it will be forced into Always mode.
Outbound
Concurrency
Limit
Maximum number of outbound simultaneous calls that an extension can make. This is also very
useful as a Security Protection against a system that has been compromised. It will limit the number
of simultaneous calls that can be made on the compromised extension.
Call Waiting
Set the initial/current Call Waiting state for this user’s extension
Internal Auto
Answer
When set to Intercom, calls to this extension/user from other internal users act as if they were
intercom calls meaning they will be auto-answered if the endpoint supports this feature and the
