UC Series User Manual
63
OpenVox Communication Co. , LTD.
URL: www.openvox.cn
Figure 2-2-9 Add FXO Trunk
Table2-2-6 Definition Add FXO Trunk
Item
Definition
Basic
Enable Trunk
Check this to disable this trunk in all routes where it is used.
Trunk Name
Descriptive Name for this trunk.
Group ID
FXO channels are referenced either by a group number or channel number (which is
defined in chan_dahdi.conf). The default setting is g0 (group zero).
Policy
Used to make FXO trunks decisions, help determine the ringing order among multiple
members of group
Member of Groups
Adding FXO ports into trunk groups allow automatic selection of the selected idle port
for outgoing calls.
Advanced
Outbound CallerID
CallerID for calls placed out on this trunk
Format:
<#######>
. You can also use the format: “hidden”
<#######>
to hide the
CallerID sent out over Digital lines if supported (SIP/IAX).
CID Options
Determines what CIDs will be allowed out this trunk. IMPORTANT: EMERGENCY
CIDs defined on an extension/device will ALWAYS be used if this trunk is part of an
EMERGENCY Route regardless of these settings.
Allow Any CID:
all CIDs including foreign CIDS from forwarded external calls will
be transmitted.
Block Foreign CIDs:
blocks any CID that is the result of a forwarded call from off the
system. CIDs defined for extensions/users are transmitted.
Remove CNAM:
this will remove CNAM from any CID sent out this trunk
Force Trunk CID:
Always use the CID defined for this trunk except if part of any
EMERGENCY Route with an EMERGENCY CID defined for the extension/device.
Intra-Company Routes will always transmit an extension’s internal number and name.
Maximum Channels
Controls the maximum number of outbound channels (simultaneous calls) that can be
