UC Series User Manual
75
OpenVox Communication Co. , LTD.
URL: www.openvox.cn
Table 2-2-13 Definition of add Time Conditions
Item
Definition
Time Condition
name
Give this Time Condition a brief name to help you identify it.
Time Group
Select a time group created under Time Groups. Matching times will be sent to
matching destination. If no group is selected, call will always go to no-match
destination.
2.2.3.6 Time Groups
The Time Groups Module is used to define periods of time that can then be selected in the Time
Conditions module or Outbound Routes module.
For example, you might create a Time Group called "Lunch" that might start at 12:00 p.m and end at
1:00 p.m. You could then create a Time Condition that would use the Lunch Time Group to send
calls to voicemail during lunch, and to a ring group at other times.
Figure 2-2-17 Time Groups interface
2.2.3.7 PIN Sets
FreePBX allows you to require callers to dial a password before an outbound call will go through.
You can require a password on all calls, or only on calls to certain numbers.
The PIN Sets Module allows you to create define groups and then assign a list of passwords to each
group. You can then restrict certain calls to certain groups by going to the Outbound Routes Module
and limiting the route to a certain PIN Set group. Each Outbound Route can be limited to just one
PIN Set group. So, if you want to allow more than one PIN Set group to make a certain type of call,
just create a duplicate Outbound Route and assign the second Outbound Route to a different PIN Set
Group.
