Cable Connection
Please use the dedicated power adapter. Otherwise, the failure or damage
caused by other power adapters is not covered by the warranty.
①
Connect the LAN port to the LAN switch using a network cable.
②
Use the dedicated power cable and turn on the power, the UC501
system starts, and the power indicator is green.
③
Connect the FXS connector to the analog phone using a telephone line.
④
Use a telephone line to connect the FXO interface to the PSTN line or
the internal line of legacy PBX.
Note: Please connect the PSTN line or analog phone to the corresponding
interface according to the color of the interface indicator.
Summary of Contents for UC501
Page 1: ...OpenVox Communication Co Ltd UC501 IPPBX Quick Start ...
Page 8: ......