VoxStack Series Wireless Gateways User Manual
67
You need to understand its rules when using TLS. The following table shows the
setting parameters of TLS.
Table 4-5-1 Parameters of TLS settings
Options
Definition
TLS Enable
Enable or disable DTLS
-
SRTP support.
TLS Verify Server
If set it off, there is no need to verify the server certificate
when the client is operating. If you do not have a server CA
certificate, you can disable authentication to connect
without the need for a TLS CA file.
Port
TLS port SIP registration, default port 5061.
TLS Client Method
Values include tlsv1, sslv3, sslv2, which specify the protocol
for the outbound client connection. The default is sslv2.
Enter the key name, IP address, organization and password in the above settings to
create a ca certificate. After mutual authentication between the client and the server,
it can be accessed with a certificate.
We need to do a few basic steps:
1.
Your asterisk server requires an authentication. We must create or add a
certificate on the asterisk server. We need to create a digital key for our server,
the server key is the key.pem file, and the certificate request is request.pem.
2.
Add some configuration settings to the sip.conf file.
3.
Configure the client to use TLS.