124
Statistics
FalconV User Manual - Standard Scanning - OPEX Corporation
Missing Piece at Straight
Through Path
Results when the piece was supposed to go to
the stacker bypass bin but didn't.
Batch Manager has an
Internal Error
Results when there is an internal error within
Batch Manager.
Detected a File Write
Error
Results when the software detects a problem
with writing image or batch files to the specified
directories.
ScanLink Plug-in Failed
Results when there is a failure sending
information to the ScanLink plug-in.
ScanLink Plug-in
Requested a Jam
Results when the ScanLink Plug-in has
requested a jam.
Host to Controller Report
Missing
Results when the controller is expecting piece
information from the host and does not receive it
within the expected time window. This is
frequently caused by pushing the system to its
limits or by something causing the system to get
out of sync.
Jam Caused by Reject
Results whenever a reject other than Jamsorts
occurs. Thus every reject other than Jamsorts is
counted as a jam under this category. The Job
Parameter “Stop Machines for Rejects” must be
set to something other than
No
for rejects to jam
the machine. Otherwise, rejects will be directed
to the reject bin and processing will continue.
Double Detected
The Multifeed Sensor indicates that two pieces
are being fed together.
MFD Skew Angle
Exceeded Sensor
Blocked
The MFD Skew Angle Exceeded Sensor is
blocked.
MFD Skew Damage
Exceeded Sensor
Blocked
The MFD Skew Damage Exceeded Sensor is
blocked.
Table 11: Reasons for jams (continued)
Summary of Contents for FalconV
Page 5: ...5 FalconV User Manual Standard Scanning OPEX Corporation Performance Details statistics 119...
Page 6: ...6 FalconV User Manual Standard Scanning OPEX Corporation...
Page 82: ...82 Operation FalconV User Manual Standard Scanning OPEX Corporation Figure 24 Ending the job...
Page 110: ...110 Maintenance FalconV User Manual Standard Scanning OPEX Corporation...
