Operation
85
FalconV User Manual - Standard Scanning - OPEX Corporation
ID Assist
The ID Assist tracking system provides an additional method for identifying
and/or taking action on items to be scanned. IdAssist must first be enabled in
the job in order to use this feature. Note that ID Assist will NOT work in Stack
Feed mode.
ID Assist uses three through-beam sensors: ID Assist #1 and ID Assist Verify
are used together to initially enable the ID Assist feature. ID Assist #2 is used
for tracking of items that have been dropped.
Using IdAssist
To trigger IdAssist, swipe the item left to right in front of the IdAssist verify and
IdAssist #1 sensors (see Figure 27) and release. The IdAssist verify sensor
puts the IdAssist feature in an “alert” state waiting to see if the item will be
moved to the right, blocking IdAssist #1. If the item is not swiped left to right,
IdAssist will not be engaged.
Figure 27: IdAssist sensors
When a job is run that uses IdAssist, the IdAssist indicator LED will be solidly
lit. When IdAssist is triggered, the indicator light will blink, indicating that
IdAssist was activated. Once the item is processed, IdAssist will be disabled.
IdAssist verify
IdAssist #2
IdAssist #1
IdAssist indicator LED
Summary of Contents for FalconV
Page 5: ...5 FalconV User Manual Standard Scanning OPEX Corporation Performance Details statistics 119...
Page 6: ...6 FalconV User Manual Standard Scanning OPEX Corporation...
Page 82: ...82 Operation FalconV User Manual Standard Scanning OPEX Corporation Figure 24 Ending the job...
Page 110: ...110 Maintenance FalconV User Manual Standard Scanning OPEX Corporation...
