Replacing the Optical Filter
To replace the optical filter:
1. Remove the lens from the camera (see
).
2.
Assemble the filter replacement tool by screwing the tool head (B)
onto the handle (A).
3. Insert the tool into the camera and turn counterclockwise (C) to
remove the optical filter which is currently in the camera.
4.
Place the removed filter into the optical filter box.
5. Point the camera up and gently insert the new filter into the camera.
6. Using the tool, turn the optical filter clockwise until tight.
7. Reconnect the lens to the camera.
CAUTION
▪
Be careful not to touch the optical filter.
▪
Optical filter replacement should be done in a clean area. Ensure the
filter stays free from dust or dirt particles, and that dust or dirt particles
do not enter the camera when replacing the filter.
C
B
A
Operation | Replacing the Optical Filter
81.
MENU
EyeCGas® 2.0 | User Manual Rev 01 | Doc P/N: UM-8G9A0000B
