Using the StarBright Display Unit
StarBright User Manual
24
3.4.5
Line Frequency
Setting Line Frequency correctly removes electrical noise that may impact the measurements.
To set line frequency:
1.
In the main screen, use the Down (
↓
) Navigation key to select
Line Frequency
and press the
Enter
key.
2.
Set to
50Hz
or
60Hz
, depending on the electrical power grid of the area that you are in.
3.
Press the
Enter
key to save the new setting.
3.4.6
Language
The StarBright display can be configured to one of several languages (English, Japanese, Russian,
or Chinese).
To set the user interface language for the instrument:
1.
In the main screen, use the Down (
↓
) Navigation key to select
Language
and press the
Enter
key.
2.
Set to English, Japanese, Russian, or Chinese.
3.
Press the
Enter
key to save the new setting.
Note:
If you mistakenly save the Japanese (or any foreign) language as the StarBright startup
language, you can revert to English.
To revert to English (from a foreign language):
1.
Disconnect the sensor from StarBright.
2.
Turn the StarBright off and on again. The
Instrument Settings
screen appears (titled “head
disconnected” in Japanese).
3.
Press the Down (
↓)
Navigation key
2
times to select/highlight the “Language” option.
4.
Press the
Enter
key and select
English
(at the top of the language list).
5.
Press the
Enter
key to save English as the startup language.
Note:
The current settings are automatically saved for the next time StarBright is turned on.
