Logging Data to a File for Upload to PC
StarBright User Manual
81
After this initial check for the Disk on Key, the
Log Setup
Screen is displayed, as shown in
Figure
11-2 Log Setup Screen
The Log Setup Screen is divided into 3 main sections and comprises the following components:
The sensor’s measurement parameters (disabled) at the top of the screen.
Logging Parameters (in the middle) for configuring the data-logging, as needed.
Context Sensitive Help (in the lower area) for the selected parameter.
Soft key legends (at the bottom of the screen):
Start: Start logging based on selected sensor and log parameters.
Files: Enter the Log Files screen.
Exit: Exit to the main menu screen.
11.2
Setting Logging Parameters for the Various Stop Modes
You begin the logging process by configuring the
Stop
mode parameters to set logging to stop
after a predetermined period of time, number of measurements, or manually.
Figure
11-3 Stop Mode Options
To set the logging parameters for the various Stop modes:
1.
In the
Log Setup
screen, go to
Stop Mode
and select an option (click the links for more
details):
: to manually stop logging.
