Graphical Displays
StarBright User Manual
66
9.7.1
Measuring Modes
The only
Measuring
mode that Exposure displays can be used with is:
Exposure
9.7.2
Manual/Timeout/Pulses
Press
Manual
(the rightmost soft key) to display the Exposure End menu. Use the up
↑
/down
↓
and left
←
/right
→
Navigation keys to select the options to end the exposure measurement:
Option
Description
Sample Figure
Manual
Stops exposure measurement by the
user pressing the
Stop
key.
Figure
9-27 Manual Option Selected
Stops after the specified time has
elapsed (as shown on the key legend).
You can select: 1 second, 3 seconds, 10
seconds, 30 seconds, 1 minute, 3
minutes, 10 minutes, 30 minutes, or 1
hour. Will also stop by the user pressing
the
Stop
key.
Figure
9-28 Timeout Options
Stops after the specified number of
pulses has arrived (as shown on the key
legend). You can select: 1, 2, 5, 10, 20,
50, 100, 200, 500, 1000, 2000, or 5000.
Will also stop by the user pressing the
Stop
key.
Figure
9-29 Pulse Options
