2
2
3
4
1b
1a
1
Instructions 101.141
LT-Racer with Propeller Drive
Transfer the position of the battery compartment (4) and of the bea-
ring spider (3) on one of the cuts from step 1. (part 1a)
Contents List:
Qty:
Size (mm):
Designation:
Part No.:
Motor R140
1
Drive
11
Spring-Steel Clamp
1
17-22
Motor Mount
12
Rocker Switch
1
16,3
Switch
13
Chipboard Screw
1
16x3
Mount Spring-Steel Clamp
14
Cylinder Head Screw
1
25x4
Screw Connection Front
15
Nut
2
M4
Screw Connection Front
16
Washer
2
9/4,3
Washer
17
Jumper Wire Red
1
500
Cabling
18
Blade Receptacle
2
Battery Connection
19
Propeller Blade
3
Propeller
20
Cylinder Head Screw
3
6x2
Propeller
21
Propeller Hub
1
Propeller
22
battery compart-
ment (top)
bearing spider (bottom)
Drill the top (other cut from step 1) as shown in the template (page 7).
(part 1b)
ø2
ø4
Then transfer the template for the motor mount (page 7) on the
plywood (2) and saw it with the fretsaw. Clean the saw cuts with the
sandpaper and the file.
2
Put the plywood panels (1) on top of each other and fix them with
adhesive tape. Now transfer the template (page 7) and saw the shape.
Clean the saw cuts.
ø15