4
E106061#1
5.2.2 Trace the shape of the cockerel and the tail ( See page 9 ) on the second aluminium sheet. Centre punch all
the middle points. Now cut out the shapes with shears. Remove any burr.
Note!
The cockerel is only and idea –you can of course design your own motif
Drill the holes for the screws making sure that they are horizontal
5.2.3 Bend the connecting rod from the welding rod as shown in the plan
5.3 Mounting the single parts
5.3.1 Place the machine screw 4 x70mm through the turbine and tighten it with a nut
Insert the screw through the bearing on the frame ( Shorter piece) now add two lock nuts and contra tighten
them so that the turbine turns easily then add on the joiner , Tighten with a nut
Machine screw 4 x 20 mm in the free hole of the joiner 2 nuts
Add the connecting rod . Ensure that the mechanism turns easily
6
Ø 3
4
3
30
30
20
Ø 3
10 10
120
