4
D112765#1
69
60
69
60
6
5
9
6
INSTRUCTIONS
15. Add the four brass tubes
(8) Then 4 washers (7)
and once more four brass
tubes (8)
19. Insert the acrylic panels in
place as shown.
18. From underneath the lid
(1c) insert 4 machine screws
(5) then 4 brass tubes (9)
Finally add the cover 4 do-
med nuts (6) then tighten !
Note:
The tabs on the lid (c) face
upwards!
20. Place the lid on the lantern
making sure that the acrylic
sides sit properly in place.
Fix it place with 4 domed
nuts (6) and tighten
Finished!
To insert the tea light
candle slide the front
panel upwards!
Bending pattern for the
handle 1:1
16. Cut the aluminium wire
to 219mm. On each end
bend a 8mm eye loop Use
the pattern as a help
17. Fix the handle to the lid
(1d) as shown Use a pair of
pliers to fit it into the holes
securely.
8
8
7
1d
1c
