2
1
2
3
1
2x
4
5
4
3x
1x
Instructions 116.415 Hologram
Transfer dimensions on to wooden strip (1). Cut two pieces (115x30mm)
from each length of wood. Tidy up the ends.
Cut a recess (10x5mm) from one of the strips.
Transfer dimensions on to wooden strip (2). Cut two pieces (105x5mm) from each length of wood. Tidy up the ends.
1
2x
2
Glue a wooden strip (2) to each of the wooden strips (1), using the
measurements shown.
Glue the four sides to the base (4) as shown to create a frame. Let the
glue dry thoroughly.
2
1