E102698#1
Simple beginners chuck glider ( Easy Line )
To complete this project you will need the following items:
A set square, pins, white PVA glue, modelling knife, sellotape.
Leave all glued parts to dry thoroughly!!!
Parts list:
1 Wing, middle section
1,5 x 48,5 x 125 mm
Part 1
2 Wing, tips
1,5 x 48,5 x 84 mm
Part 2
2 Fuselage nose, parts
1,5 x 16,5 x 142 mm
Part 3
1 Fuselage, boom
3 x 3 x 310 mm
Part 4
2 Fuselage, sides
1,5 x 19,5 x 67 mm
Part 5
1 Tail plane
1,5 x 33 x 98 mm
Part 6
1 Tail fin
1,5 x 33 x 48 mm
Part 7
Lead shot
approx. 2 gm
1 0 2 . 6 9 8
C l o u d ( n e w v e r s i o n )
1
Please Note
The OPITEC range of projects is not intended as play
toys for young children.They are teaching aids for
young people learning the skills of Craft, Design and
Technolo- gy.These projects should only be underta-
ken and tested with the guidance of a fully qualified
adult. The finished projects are not suitable to give to
children under 3 years old. Some parts can be swallo-
wed. Dan- ger of suffocation!
