2
1
1
ø2
ø3
2
Transfer the template (page 5) to the base plate (1). Drill all holes (ø3,
ø4mm).
Saw off all parts and clean with sandpaper.
1a
1b
1e
1f
1h
3
Glue together the upper part of the wheelbarrow from the individual
parts (1a, 1b, 1c) as shown.
6
Glue the axle rods (1e) according to dimensions as shown. Let the glue
dry well.
Note:
For alignment, the axle can be inserted through the holes.
4
From the side edge, measure 8mm on both sides as shown and glue
the wooden strip (1d) as shown. Let the glue dry well.
5
Apply the handles of the wheelbarrow (1f).
1d
1b
1c
1d
1e
1g
1i
1j
1f
1h
1k
1l
1c
1b
1b
1a
1e
1e
1f
1f
Building Instruction 120.830
Running worker with wheelbarrow
