4
Glue two wooden wheels (3) ø20 as "feet" to the lower edge of the
legs (1i). Let the glue dry well.
15
11
Place the legs on the sprocket bolt and secure it with the spacer roller
(11), washer (15), washers (15) and screw (10) to the marking in the
head as shown, so that the legs are flexible .
16
17
4
On both sides, screw a washer (15) and a stop nut (14) onto the gear
screws so that they are free of play.
14
Glue the two arms (1j) at the marked point on both sides of the body
as shown.
1j
1j
4
1i
2x
15
10
14
15
15
14
13
For better grip, flatten the wooden ball (2) ø40mm with the workshop
file on one side. Then apply to the top of the body.
2
18
Glue the wheelbarrow to the end of the arms as shown above. Let the
glue dry well.
Building Instruction 120.830
Running worker with wheelbarrow