Oplink Communications
5.2. AP
Log on the web-based interface as chapter 4 and then
configure the mode as below.
5.2.1Select “AP”, click “Setup Wizard” and “Next”
button.
5.2.2. Configure the parameters
SSID
：
SSID (Service Set Identifier) is the unique
name of the wireless network. Input the SSID of the
AP you want to connect.
MAC Address: The Router’s physical MAC address
as seen on your local network is unchangeable. Input
the MAC address of the AP you want to connect.
Sometimes, MAC address is also named BSSID.
(BSSID
：
Basic Service Set Identifier of wireless
network. In IEEE802.11, BSSID is the MAC address
of wireless access point.)
Channel: Specify the effective channel (from 1 to
13\Auto) of the wireless network. The channel you
select must be correspondence with the AP.
Security Mode: The security mode you set should be
the same as the AP. More details please refer to the
