Oplink Communications
Enable: Check to enable remote web management.
Port: The management port open to outside access.
WAN IP Address: Specify the range of the WAN IP
address for remote management.
Note
:
1. If you want to login to the Web-based interface via
port 8080, you need use the format of WAN IP
address: port (for example
http
:
//220.135.211.56:8080
) to implement remote login.
2. If your WAN IP address starts and ends with
0.0.0.0, it means all hosts in WAN can implement
remote Web management. If you change the WAN IP
address as 218.88.93.33-218.88.93.35, then only the
IP addresses as 218.88.93.33, 218.88.93.34 and
218.88.93.35 can access the Router.