Biopel line – Compressor burner cleaning 10 – 200 kW
3
1
COMPRESSOR BURNER CLEANING 10 – 200KW
You can use compressor kit for all Biopel burner from 10 to 200 kW. Assembly is the same so follow all
instructions below.
1.1 Packaging
In the packaging of compressor kit you can find parts included in the list below.
Compressor
Solenoid valve
4pcs burner tubes
4m PVC hose small
Fitting reduction
½“ x ¼“
Fitting reduction
3/8“ x ¼“
Fitting socket
¼“
Fitting nipple reduced
½“ x ¼“
4pcs angled connector straight
Angled connector with two outlets
Angled connector with four outlets
4pcs circlip
1.2 Assembly
Please reed all steps carefully. It is werry important to connect all parts as it is written inside this manual.
Only certificated installer should install this device.
Open packaging and remove all parts from the box.
Use sailing material on all external threads of all fitting parts.
Connect compressor outlet to fitting nipple reduced
½“ x ¼“
Now connect compressor with solenoid valve.
