Biopel line – CS-65 GSM modul user manual
7
5 DATA COLLECTION AND SETTINGS
5.1 Pin authorisation
User can at any time change the authorisation pin by sending an sms message to the module phone
number in the format:
Current pin authorisation
space pin
space new pin authorisation
1234
pin
9999
Namely: 1234 pin 9999
A message of this type will changethe module authorisation pin from 1234 to 9999 and will send the
return sms with the current working parameters of the boiler.
The authorisation pin is intended for changing settings and working modes of the module. It is not
recommended to disclose it to third persons.
5.2 Activation / deactivation of alert notices
User can, at any time, acivate or deactivate sending of alert information from module by sending to the
module phone number a message in the format below:
Current pin authorisation
space command
1234
off
Namely: 1234 off
A message of this type will deactivate sending alert messages from the module. Sending messages in
this forma tis equivalent to switching the option in the module menu:
Notification
–
Activated
–
No
Or you can activate alert messages by sending an smsm message to modul phone number:
Current pin authorisation
space command
1234
on
Namely: 1234 on
A message of this type will activate sending of alert messages from the module. Sending messages in
this forma tis equivalent to switching the option in the module menu:
Notification
–
Activated
–
Yes
If notification is activated, the user should set the frequency of cyclical receipt of sms messages ith
current parameters of sensors after the alarm occurrence:
Notification
–
Time of next alarm
–
0
– 300 min
In the case of selecting 0 value, the alarm cyclical reminder function shall be inactive.
