Ops-Core SOTR, Operator'S Manual

MAINTENANCE SCHEDULE

SOTR MASK MAINTENANCE SCHEDULE 

SOTR FILTER MAINTENANCE SCHEDULE 

9

1

Clean the mask with 70% isopropyl alcohol and let dry.

2

Check that the snaps are in working condition.

3

Clean the Velcro of dust and dirt by using pressurized air.

4

Visually check the snaps, exhalation valves, inhalation valve, and filter gasket for signs of damage.

5

Visually check the SOTR facepiece for any signs of damage.

6

Check that both harnesses work properly and do not have any damage.

7

Visually check the microphone and conduct operational checks of the microphone. 

         NOTE:

 If any defects are found, the damaged components should be replaced before use.

1

Always start your training or operation with a new filter. 

2

Once the filter becomes difficult to breathe through, discard the filter* and replace with a new one. 

3

Visually check the filter gasket on the front of the yoke for any signs of damage.

4

Replace the filter gasket after 50 filter changes (or earlier if damage is observed).

         NOTE:

 *Dispose of the filter according to your unit’s recommendation. The filter will contain 

hazardous elements and must be disposed of accordingly. Local, state, and/or federal disposal  

regulations may apply.