2
Windows 2000/XP Operating System
1. Plug the USB receiver connector to your PC.
2. The Found New Hardware Wizard appears and the OS will
install the driver automatically. No other steps are necessary.
You are now ready to begin using your wireless keypad
ID setting
Plug the receiver into your notebook’s USB port and turn on the
wireless keypad. Pressing the ID button on the receiver, then the
ID setting is accomplished.
Special Function:
This new keypad has no synchronized problem; users can use the
keypad and inputting characters from a notebook at the same time.
Especially, it doesn’t need any drivers and fully support Plug &
Play.
No matter the Host’s Num Lock function status, users can choose
the Num Key or direction key on the keypad. When users press the
keypad’s Num Lock key once, it can change the keypad’s Num
Lock status. If press the Num Lock key until 0.8 sec, then the
Host’s Num Lock status will be changed. This function is designed
