Optelec
FarView
English
Page 46
mode. Press any button, except for the on / off
button, to switch the lights back on.
Brightness is unstable
This might occur when the aperture value is
set (this does not affect the recorded pictures.)
Monitor flickers indoors
Monitor may flicker after switching unit on (this
prevents any influences from fluorescent
lighting).
Black/blue/red/green dots or interference
appears. Monitor looks distorted when touched
This is not a malfunction. These dots will not
be recorded on the actual picture.
Playback
Questions
Answers
Cannot view pictures
Check if the unit is set to playback
mode.
No pictures in the internal memory.
Picture is too bright or too dark
Check if the unit is set to playback
mode.
Adjust the brightness by rotating the
contrast adjustment button.
Connection with an external monitor or PC
Questions
Answers