Optelec
FarView
Nederlands
Pagina 16
Aan- / uitschakelen van de FarView
Druk de rechthoekige knop, aan de rechterzijde van de unit, twee seconden in om de unit aan-
en uit te schakelen. De FarView start standaard op in live modus.
Batterij indicator
Wanneer de unit wordt ingeschakeld, wordt het batterij niveau gedurende twee seconden
weergegeven op het scherm. Wanneer de batterijen bijna leeg zijn, zal de batterij indicator
knipperen en zal de unit een aantal piepjes genereren. Sluit de unit met behulp van de AC
adapater aan op een stopcontact om de batterijen te laden.
Stand-by modus en automatisch uitschakelen
Deze functie schakelt de FarView automatisch in stand-by mode wanneer deze 3 minuten
aaneengesloten niet is gebruikt. Wanneer de unit in stand-by modus is, zal het LCD scherm
uitschakelen en zal het lampje rechts van het scherm knipperen. Druk een willekeurige knop in,
met uitzondering van de aan / uit schakelaar, om terug te keren naar de voorgaande modus.
Wanneer de unit in stand-by modus gedurende 4 minuten niet wordt gebruikt, zal deze
automatisch uitschakelen. Druk de aan / uit schakelaar gedurende twee seconden in om de unit
aan te zetten.