Optelec
Traveller HD
12
English
2. Getting started
The Traveller HD is placed correctly in front of you when the screen is facing
up, and the Zoom wheel is located at the right side of the screen.
2.1. Using the Traveller HD
The Traveller HD can only be used in the open position. The screen will be
set at an ergonomic angle for an optimal reading position, while the camera
will point downward. The open position enables you to read long texts and
easily slide over documents.
To open the unit, follow these steps:
1.
Place the Traveller HD in front of you so that the screen is facing up,
and the Zoom wheel is at the right side of the screen.
2.
Press the two blue Release buttons located at the outer sides of the
roller. The Traveller HD screen will unlock, move up and power on.
3.
Lift the screen until the screen locks in the up position.
Press the two blue Release
buttons to unfold the Traveller
HD
Lift the screen until it locks in the
open position
To close the unit, follow these steps:
1.
Place the Traveller HD in front of you so that the screen is facing up
and in center position, and the Zoom wheel is at the right side of the
screen.
2.
Press the two blue Release buttons located at the outer sides of the
roller.
3.
Lower the screen until the screen locks into the closed position.
Important:
Only use the blue Release buttons to unlock or collapse the
screen. Do not force the screen up or down.
