Optelec
Traveller HD
18
English
Menu: Brightness
This menu item allows you to adjust the brightness of the display.
- Activate the menu by pressing the Menu button for 2 seconds.
- Use the Menu
button to move up and the Reading Line
button to move
down within the menu. Select the menu option Brightness and activate
this menu by pressing the Mode button.
- Select the brightness level by using the Menu button to increase and
the Reading Line button to decrease the brightness level. There are 5
brightness levels to choose from. The default brightness level is 5.
- Press the Mode button to confirm your choice.
- Press the Snapshot button to go back to the previous menu.
Menu: Power
This menu item contains four submenus:
- Standby: To set the time before the Traveller HD goes into standby
mode
- Power off: To set the time before the Traveller HD switches off
- Open: To enable or disable the power-on function upon opening the
Traveller HD.
- Close:
To enable or disable the power-off function upon closing the
Traveller HD
Submenu Standby
Sets the time before the Traveller HD goes into standby mode
to conserve power. Pressing any button will take the unit out of
standby mode. By default, the standby time is set to 15
minutes.
To adjust the standby time of the TravellerHD:
- Activate the menu by pressing the Menu
button for 2 seconds.
- Use the Menu button to move up and the Reading Line button to move
down within the menu. Select the option Power and activate this menu
by pressing the Mode button.
- Select the Standby option by using the Menu and Reading Line buttons
to scroll through the options. Press the Mode button to confirm your
choice.