Optelec
Traveller HD
English
19
- Select the time before the unit will enter Standby mode by using the
Menu button to increase and the Reading Line button to decrease the
time. Press the Mode button to confirm your choice. Selecting NEVER
will disable the Standby function.
- Press the Snapshot button to go back to the previous menu.
Submenu Power off
Sets the time before the Traveller HD is automatically switched
off. By default, the power off time is set to 5 minutes. These 5
minutes are activated after the default standby time of 15
minutes. By default, the unit is therefore automatically switched
off after 20 minutes.
To adjust the Traveller HD power off time:
- Activate the menu by pressing the Menu
button for 2 seconds.
- Use the Menu
button to move up and the Reading Line
button to move
down within the menu. Select the menu option Power and activate this
menu by pressing the Mode button.
- Select the Power off option by using the Menu and Reading Line
buttons to scroll through the options. Press the Mode button to confirm
your choice.
- Select the time before the unit will power off by using the Menu button
to increase and the Reading Line button to decrease the time. Press
the Mode button to confirm your choice. Selecting NEVER will disable
the automatic power off function.
- Press the Snapshot button to go back to the previous menu.
Submenu Open
To enable or disable the power-on function upon opening the
Traveller HD:
- Activate the menu by pressing the Menu
button for 2
seconds.
- Use the Menu
button to move up and the Reading Line
button to move down within the menu. Select the menu option Power
and activate this menu by pressing the Mode button.
- Select the Open option by using the Menu and Reading Line buttons to
scroll through the options. Press the Mode button to confirm your
choice.
- To enable the power-on function upon opening the unit, select the
value POWER ON by using the Menu or Reading Line button. Press
the Mode button to confirm your choice. Selecting NOTHING will
disable the power-on function upon opening the unit.
- Press the Snapshot button to go back to the previous menu.