Optelec
Traveller HD
English
23
Appendix A: Safety and Regulatory Notices
Please read the instructions carefully before setting up your Traveller HD.
Keep this user manual for future reference.
Intended Use:
The Traveller HD is designed in such a way that it can be used in a hospital
environment for general purposes such as reviewing medical records. The
Traveller HD can not be used for surgical procedures in combination with life
supporting systems.
Warning:
Critical diagnostic decisions should not be based on images
displayed by this device.
Do not expose the Traveller HD to excessive heat or direct sunlight to
avoid the risk of fire.
Do not remove any parts of the Traveller HD. Contact an Optelec
authorized service organization in your area.
To avoid risk of electrical damage, keep your Traveller HD away from
fluids and chemicals.
Handle the Traveller HD with care. Rough handling will damage the
internal components.
Do not use the Traveller HD near inadequately shielded medical
devices.
Do not try to open the battery compartment or try to remove the battery.
Contact your dealer to service this equipment if necessary.
Do not
disassemble your unit
as it will void the warranty.
Always unplug and switch off the unit before cleaning. Use a dry soft
cloth to clean the exterior. Do not use cleaning agents or abrasive
materials as they will damage your unit.
Use of the Traveller HD other than described in this manual will exclude it
from warranty conditions.
Contacting Product Support
If you have questions about operating, installing or configuring your Traveller
HD, please contact your Optelec distributor or the Optelec office nearest to
you. See the last pages of this manual for a complete list of Optelec
addresses.
Warranty Conditions
Optelec warrants the Traveller HD, effective from the date of delivery, to be
free of any defects in material and workmanship.
