Exercise Information
Turning on the treadmill
SAFETY KEY:
The treadmill will only work if the Safety Switch (
54
) is properly locked in the provided notch of the
console. Insert the Safety Switch (
54
) and attach the clip to your chest or the waist belt of your clothes.
Then move backward to test the safety key. The safety key should be able to be pulled out from the
console with the clip still on your clothes.
If you need to turn the motor off immediately, just pull the Safety Switch (
54
) out of the console. For
emergency dismount hold the left or right handlebar then jump onto the side rail or the floor.
Plug in the mains power and turn on the switch (
1
).
You will hear a beep and the screen of the Computer will light up.
OVER-CURRENT PROTECTOR:
There is an over-current protector (
2
) located on the right side of the switch (
1
) (see above picture); in
case of short circuit or over-current, the Button of the over current protector will pop up and the treadmill
will power off; please unplug the power source and push down the button, Plug the machine back in and
then turn on the switch to restart your treadmill. If the button pops up again, please contact the Customer
Helpline 0345 600 1714 .
16
Getting Started
Summary of Contents for 604/6848
Page 31: ...Exploded Parts Diagram 30...
