Reference
R - 5
Form 361015-0001A
FiberPoint Structured Wiring Enclosure Installation Guide
F
IBER
P
ATH
500 S
YSTEM
S
PECIFICATIONS
FiberDrive Chassis
Power*
Voltage Range...................................... -42 to -75 VDC
Voltage Supply ............................................... -48 VDC
Max Watt Draw.............................................. 402 watts
Max Current Draw ......................................... 8.4 amps
Max BTU’s Output .................................. 1372 BTU/Hr.
* Assumes full chassis with 9 GPON cards
Interfaces
Data.......................... 10/100 BaseT Ethernet via RJ45
T1 ..................................... 50 Pin Amphenol (mirrored)
Fiber ................................................................SC/APC
Craft Port ............................................................... DB9
Capacities
PONS .................................................. 36 (9 cards x 4)
FiberPoints ....................................1,152 (32 per PON)
PON Bandwidth (downstream).................. 1.2 Gbit/sec
PON Bandwidth (upstream) ......................... 622 Mbps
CRV.........................................2048/per GR303 Group
or 5600 across all three groups
Data...................................................................9 Gbps
Video and Data DHCP’s ...................................... 9,216
Static IP Addresses ............................................. 9,216
Static IP Subnets ................................................. 2,304
Cooling
Forced air with removable fan tray
CPU module
Power
Max Watt Draw................................................15 watts
GPON module
Power
Max Watt Draw - 4 ports enabled ....................38 watts
Optical Power
Tx Power Out (Minimum) ...................................1 dBm
Tx Power Out (Maximum) ..................................4 dBm
Rx Window ........................................... -27 to -14 dBm
Interfaces
Data Interface................................................. (1) RJ45
Fiber Interface ........................................... (4) SC/APC
Capacities
PONs.......................................................................... 4
FiberPoints ............................................................. 128
FPs/PON .................................................................. 32
CRVs ...................................................................... 671
Data .................................................... 1 Gbps per card
T1 (DS1) module
Power
Max Watts..........................................................7 watts
Impedance................................ 100 Ohms twisted pair
Interfaces
Physical .............................................50 Pin Amphenol
Electrical.......................................................... GR-303
Capacities
T1s ........................................................................... 12
Splitter Shelf (OEM-CMS)
Dimensions.............................................. 7” x 19” x 12”
(17.8 x 48.2 x 30.5 cm)
Capacity
.............................................. (12) 1 x 2 Slots
(12) 1 x 4 Slots
(12) 1 x 3 Slots
(6) 1 x 8 Slots
F
IBER
P
ATH
500 PON S
PECIFICATIONS
Splitter/Coupler Loss
Typical
Connector
Splitter
Loss (dB)
Type
1 x 2
3.70
SC/APC
1 x 3
5.10
SC/APC
1 x 4
7.25
SC/APC
1 x 8
10.38
SC/APC
1 x 16
14.10
SC/APC
1 x 32
17.45
SC/APC
Connector Loss
Type
Loss (dB)
SC/APC
(.25)
SMF28 Fiber Loss
Fiber
Loss/km
Loss/Mile
Type
Max (dB)
Max (dB)
1550
.25
.40
1310
.40
.64
CWDM Loss (Nominal)
Insertion Loss @ 1310 nm ............................... (.8) dB
Insertion Loss @ 1550 nm ............................. (1.2) dB