OPTICAL SYSTEMS DESIGN
DOC ID: 10115304
OSD2251P OPERATOR MANUAL
PAGE 38
C
ONFIGURATION
P
O
E
P
ORT
Indicates port number per row.
P
O
E
E
NABLED
A tick indicates the PoE is enabled for the port.
M
ANUAL
P
OWER
L
IMITATION
E
NABLED
Allows the user to manually limit power in Watts (W) to each individual port. A tick
indicates that the Manual Power Limitation is enabled.
C
ONFIGURED
V
ALUE
If the Manual Power Limitation is enabled, the required Configured Value can be entered
in this window. Note: The maximum configured power setting is as follows;
•
60W version: 70W.
Entering a higher value produces a maximum of 70W only
.
•
90W version: 90W.
Entering a higher value produces a maximum of 90W only
•
Note:
Some PDs require very high inrush current (up to 1.6A). The power output
configuration value must be set to maximum of 56W!
S
AVED
V
ALUE
If a previously saved Configured Value was entered, the value will be displayed in this
window.
L
EGACY
D
EVICE
The OSD2251P provides legacy PoE support. A tick will enable Legacy devices.
H
I
-P
O
E
D
EVICE
To support Hi-PoE devices “Manual Power Limitation Enabled” and “Hi-PoE Support”
must be enabled and the current (in mA) value in the “Configured Value” must be
specified.
Buttons
: saves the new settings
: resets any changes made