OPTICAL SYSTEMS DESIGN
DOC ID: 10111504
OSD2700F OPERATOR MANUAL
PAGE 27
SAVE CONFIGURATION
1.
Load config from TFTP server:
2.
Click in “TFTP Server” text box and type the TFTP server IP address from where the file will
be obtained.
3.
Click in “FILE” text box and type the name of the file that will be obtained.
4.
Click “Load” button to load the file from the TFTP server.
5.
Backup config to TFTP server:
6.
Click in “TFTP Server” text box and type the TFTP server IP address to where the file will be
backupped.
7.
Click in “FILE” text box and type the name of the file that will be backupped.
8.
Click “Backup” button to backup the file to the TFTP server.
9.
Save Configuration: Click “Save Configuration” button to save your configuration settings.
10.
Restore Default: Click “Restore Default” button to restore the default settings of the switch.
11.
Auto save: Click “Auto save” drop-down menu to choose “Disable” or “Enable” from the
“Auto save” drop-down list to disable or enable Auto save for the switch.
12.
Auto save interval (5~65536 sec): Click in “Auto save interval” text box and type a decimal
number between 5 and 65536.
13.
Submit: Click “Submit” button when you finished Auto save configuration.
