Opticon
OPV 1001
Specifications Manual
9
5. Electrical
Specifications
5.1. Power Supply
Input voltage
DC 5 V ±5 % (6 V also supported)
Power ripple
up to 100 mVp-p (10 Hz to 100 kHz DC 5V)
Current consumption
up to 500 mA
Conditions:
•
Connect 1
Ω
resistance to a power supply line in series and measure the current
by the voltage between both ends of resistance.
•
Power supply voltage is measured at a connector terminal area.
•
The current value depends on the interface type and the host computer to which
the device is connected.
5.2. AC Adapter
Input:
Input voltage
AC 90 V to 264 V
Power supply frequency
47 Hz to 63 Hz
Maximum current
up to 400 mA (at 100 V AC/50 Hz)
Rush current
up to 70 A
Output:
Output voltage
DC 5 V ±5% (6 V also supported)
Output ripple
up to 100 mVp-p
Maximum current
2000 mA
Startup time
up to 20 ms (AC100V/50 Hz, 5% to 95% of output voltage)
5.3. Operating Indicators
5.3.1.
Red
•
Lights up when any unsupported menu is read in the menu mode (200 ms
with error buzzer).
•
Blinks when motor failure occurs (indefinitely).
5.3.2.
Green
•
Good read: when reading is done successfully.
