26
27
Connecting the FM
To use an FM receiver start by clicking the FM shoe
onto the instrument. Then attach the FM receiver to
the base of the FM shoe via the connector. When
the FM receiver is connected, the instrument will
automatically switch to a program that receives sig-
nals from the microphone in combination with an
external wireless FM transmitter. If you would like to
receive input from the FM transmitter alone, you can
switch to the next program by using the push-button.
The two new programs will automatically place
themselves after the standard programs, which
your Hearing Care Professional has given you.
Program
FM + Microphone
Program FM
To release the shoe from the
hearing instrument, click the
grey button and pull back.
The two new programs will automatically place
themselves after the standard programs, which your
Hearing Care Professional has stored in your hearing
instrument.
Program
DAI + Microphone
Program DAI
To release the shoe from the hearing instrument, click
the grey button and pull back.
Safety requirements regarding
Direct Audio Input (DAI)
The safety of hearing instruments with DAI (Direct
Audio Input) is determined by the externalsignal
source. When the DAI is connected to equipment
which plugs into a wall outlet, this equipment must
comply with IEC-60065, IEC-60601 or equivalent
safety standards.
FM
An FM receiver enables the hearing instrument to
receive signals directly from an external wireless FM
transmitter.
