background image

 
 

UL/EN Statement 

 
This equipment has been tested and found to comply with the limits for 
medical devices in UL/EN 60601-1 and FCC/CE.

  These limits are designed 

to  provide  reasonable  protection  against  harmful  interference  in  a  typical 
medical installation. 
This equipment generates uses and can radiate radio frequency energy and, 
if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause 
harmful  interference  to  other  devices  in  the  vicinity.    However,  there  is  no 
guarantee  that  interference  will  not  occur  in  a  particular  installation.    If  this 
equipment  does  cause  harmful  interference  to  other  devices,  which  can  be 
determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures: 
 

 

Reorient or relocate the receiving device. 

 

Increase the separation between the equipment. 

 

Connect the equipment into an outlet on a circuit  different from that 
to which the other device(s) are connected. 

 

Consult the manufacturer or field service technician for help. 

 

Type of protection against electric shock: Class I equipment 

 

Degree of protection against electric shock: Not classified - no applied 
parts 

 

Classification according to the degree of protection against ingress of 
water  as  detailed  in  the  current  edition  of  IEC  529:  IPX0,  ordinary 
equipment 

 

This  equipment  is  not  suitable  for  use  in  the  presence  of  flammable 
anesthetics or oxygen 

 

Mode of operation: continuous operation 

 
 

 
 
 
 
 
 
 
 
 
 
 

 
 
 
1-9 Regulatory Statements 

©  2011 Opticis Co., Ltd.  All Rights Reserved 
Revision 1.0, .Oct. 13, 2011 
 

 
 
 
 
 
 
 

 

Opticis Locations 

 

Headquarters 
 

Opticis Co., Ltd. 
 
#907, Byucksan Technopia, 434-6 
Sangdaewon-Dong, Chungwon-Gu, 
Sungnam City, Gyeonggi-Do, 462-716 
South Korea 
 
Tel: +82 (31) 737-8033~8 
Fax:+82 (31) 737-8079 

www.opticis.com

  

 
 
 

For order support, please contact your Distributor or Reseller. 

 

For technical support, check with the Opticis web site www.opticis.com or 
contact 

techsupp@opticis.com

 

 
 
 

Summary of Contents for DVFX-100-TR







Reviews: