System Requirements for Setup
Hardware requirements
You have to have a DVI graphic controller or card having a DVI
port in your PC, SUN or Mac systems. It should support the
maximum graphic resolution feature of displays to be
connected.
No special requirements memory size, CPU speed and
chipsets, if you
’ve already properly installed your DVI graphic
controllers or cards.
Software requirements
No special restrictions, if you
’ve already properly installed your
DVI graphic controller in your OS.
AC/DC Power Adapter Technical Advisory
The M1-1P0E is designed to use +5V internal power supplied
through a DVI pin (#14) from the graphic card.
However, the M1-1P0E requires one external +5V AC/DC power
adaptor to drive the Tx/Rx modules if the power supplied from the
graphic card is not enough to operate the M1-1P0E. To plug the
power into one of two modules (Tx and Rx) makes the other
supplied over the hybrid cable.
Tips:
In general, most of note PCs is not capable to supply sufficiently
DC powers for two modules.
Tips:
In general, most of laptops or desktop PCs with PCI Express
graphic card require using an AC/DC power adaptor.
1-2 System Requirements for Setup
Installation
Important: Please use the installation procedure below. Improper, or no
operation may result if the start-up sequence is not correctly followed.
Step 1
Carefully unpack the contents of the shipping group.
Step 2
Plug directly the Tx module of M1-1P0E in the DVI receptacle of PC. Do
NOT
use any intermediate cable or adapter between them.
Figure 2
– Tx Module of M1-1P0E Cable
Note:
M1-1P0E uses basically the power +5V supplied through a DVI pin
(#14) from the graphic cards. After completing the installation instruction, if
the system doesn
’t work properly, you have to confirm the power capable to
supply more than 500mA.
Step 3
Plug the Rx module of M1-1P0E in the DVI receptacle of display. Do
NOT
use
any intermediate cable or adapter between them.
Figure 3
– Rx Module of M1-1P0E Cable
1-3 Installation
