![background image](http://html1.mh-extra.com/html/opticstar/sl-131c-coolair/sl-131c-coolair_setup-manual_1642285019.webp)
Opticstar SL-131C. © Opticstar Ltd, 2010 - 2017.
18
Updated: 09/10/2017
Camera Specification
Specification
SL-131C COOLAIR
Image sensor
1/3
” CMOS
Sensitivity
1.1v/Lux-sec at 550nm
Sensor
Aptina MT9M111
Pixel size
3.6
μm x 3.6μm
Max. Resolution
1280 x 1024 pixels
Speed
16fps at 1280x1024
110fps at 640x480
160fps at 320x240
Data Readout
RGB colour 24-bit
Gain
In hardware
Region of Interest (ROI)
640x480, 320x240
Auto-Exposure
Automatic/Manual
Manual Exposure Time
0.12ms
– 57.6ms (normal mode);
0.06ms
– 28.8ms (high speed mode)
Shutter type
Rolling shutter
ADC Resolution
10-bit, dual on-chip
Dynamic Range
71dB
Signal to Noise Ratio
44dB (max)
Window glass
Clear, no Infra Red cut-off
Image Output
USB 2.0, 480 Mb/s
Power Supply
USB 2.0
Lens Mount
C/CS Mount
Mounting to telescope
C/CS to 1.25” (included)
Mounting to lens
C to T-thread (M42 x 0.75)
Mounting to microscope
C to 23mm, C to 30mm, C to 30.5mm
USB Cable
1.8 meter long
Weight
250g
Operation temperature
0
ºC
to 60
º
C
Computer requirements
Microsoft Windows
(32-bit or 64-bit) XP/Vista/7/8/10
USB 2.0
Bundled software
Opticstar View, etAMCAP, Windows drivers &
DirectShow
Microscope Attachments
In order to use the camera with microscope one
or more attachments must be used. The
attachments shown from left to right are: C/CS
to 23mm (x0.5), C/CS to 23mm (x1), C/CS to
30mm and C/CS to 30.5mm. These attachments
are not bundled with the camera.