2
Safety Precaution
This STB has been designed and manufactured to satisfy the
international safety standards. Please read the following safety
precautions carefully before operating this receiver.
Before operating, please check the un its operating voltage is 90~250V
AC 50/60Hz.
Do not overload a wall outlet, extension cord or adapter, neither use
damaged power cord or touch it with wet hand as this may result in
electric shock.
The receiver shall not be exposed to dripping or splashing water, and
that no objects filled with liquids, such as base, shall be placed on the
apparatus.
Keep the slots on top of the receiver uncover to allow sufficient airflow
to the unit. Do not put the receiver on soft fur nishings or carpets. Do
not expose the receiver to direct light or do not place it near a heater or
in humid conditions. Do not stack other electronic equipments on top of
the receiver.
Plug out the receiver from the wall outlet before cleaning . Clean the
receiver by a soft cloth or mild solution of washing -up liquid (no
solvents).
Disconnect the receiver from the mains when you connect it to satellite
LNB or disconnect it from LNB. Failure would possibly cause damage
to the LNB.
Put the receiver indoor in order to avoid lightening, raining or sunlight.
Do not remove the cover, to reduce the risk of electric shock. Contact
qualified and licensed service personnel to repair the receiver, or
contact your dealer.
